T3010S 4.5 digit I.S. indicator

4.5 digit Intrinsically Safe 4-20 mA Loop Indicator. IP 66 Enclosure, field mounting for Zone 0.




 Products comparison or request a quotation

Intrinsically Safe 4 ½ Digit Indicator for Div 1, Zone 2 Installation


Field Indicator


Loop Power




The single channel 4 ½ digit Intrinsically Safe 4-20 mA Loop Indicator type T3010Sprovides process variable reading in Hazardous Area (Div 1- Zone 2). It is a loop powered 4-20 mA unit with less than 1 V voltage drop. 
It monitors 4-20 mA current, 0-100% percentage or process variable between -19999 to +19999 range with a 20 mm height 7-digit LCD Display. Blinking display indicates over range or under range condition. An internal protected slot for label is provided to allow for insertion of the measurement indication measurement unit. Also loop tag indication can be provided. 
The indicator is housed in a moulded reinforced polyammide 66/polycarbonate IP 66 case to allow installation in field area. It can be mounted on flat surface, front panel or 2" pipe or post. The housing is divided in two parts, one for cable connection and the other for indicator parameters setting.

Data sheet:
DTS0186 T3010S data sheet (English) (PDF 342 KB)
DTS0325 T3010S data sheet (Italiano) (PDF 342 KB)
DTS0238 T3010S data sheet (Pусский) (PDF 378 KB)
Instruction manual:
ISM0064 T3010S instruction manual (PDF 577 KB)
CRT006 ATEX certificate n. DNV-2004-OSL-ATEX-0066 (PDF 297 KB)
CRT020 FM 3024643 (USA) & FM-C 3029921C (Canada) (PDF 3.42 MB)
OPT3092 Panel mounting set for T3010S
OPT3093 Pipe/Pole mounting set for T3010S
EC Declaration of Conformity DTS0255 (PDF 222 KB)
REACh, RoHS Declaration of Conformity (PDF 150 KB)