TMD110 21NV01NN
Giá bán: Vui lòng liên hệ
Hãng sản xuất: Vaisala Vietnam
Gọi lại cho tôi
Gọi điện thoại đặt mua: 0902.337.066
ANS Việt Nam là công ty XNK hàng đầu và là nhà cung cấp chuyên nghiệp các mặt hàng “Máy móc và các thiết bị, dụng cụ đo lường, kiểm tra công nghiệp”
Hãy liên hệ với chúng tôi để có giá tốt nhất.
0902 337 066 <(@^@)> Ms Diệu
I email I dieu.ans@ansvietnam.com
I website 1I http://thietbitudong.org/
I website 2I http://tudonghoaans.com/
Chúng tôi rất mong được hợp tác thành công với quý khách!
| STT | Discription |
| 1 | INDIGO80B0A1A1N0 Handheld Indicator Euro AC-adapter, including USB-C cable No Indicator Accessories Connection Cables for Transmitters: M12-M8 Service Cable 262195SP Connection Cables for Probes: M12-M12 Probe Connection Cable 272075SP Weatherproof Carrying Case for Indigo80 and HMP80 and DMP80 Series Probes ASM214759 Housing colour option grey |
| 2 | HMP80 N1E1S0 Handheld Humidity and Temperature Probe Probe (106 mm) with HUMICAP R2C Sensor Probe connection cables: M12-M12 Probe Connection Cable 272075SP Slotted MIM Filter with Membrane ASM214606SP Multilingual quick guide Standard factory calibration |
| 3 | HMM100 14A1BE Humidity Module for Environmental Chambers Output Signal: 4...20 mA, loop powered Probe Type: Stainless Steel, 1.6 m cable Measured Parameter: RH Humicap 180R for general purposes Sensor Protection: Membrane filter 10159HM English User Guide for HMM100 |
| 4 | HMM100 14A1BE Humidity Module for Environmental Chambers Output Signal: 4...20 mA, loop powered Probe Type: Stainless Steel, 1.6 m cable Measured Parameter: RH Humicap 180R for general purposes Sensor Protection: Membrane filter 10159HM English User Guide for HMM100 |
| 5 | INDIGO201 0A1A0 INDIGO201 Analog Output Transmitter without display Analog Output Settings: 4...20 mA Remote Probe Cable, 1m INDIGOCABLE1M External Power Supply: No Power Supply NO Customization |
| 6 | DMPX 7D2B4B0A0D0 Dew Point and Temperature Probe Probe Head and Cable: DMP7 for Swagelok installation Cable Length: DMP7 with 2m cable Sensor Type: DMP7/8: Standard sensor Filter Type: DMP7/8: SST Filter for Vacuum Opterating Pressure: 9 bar (absolute) Baud rate 9600 Parity, Data Bit, Stop Bit: 8, N, 2 Probe Modbus Address: 240 English calibration certificate Probe Mouting Accessory: DMP7: Swagelok NPT 1/2" SWG12NPT12 No Connection Cable |
| 7 | HM40HANDLE HM40 Handle and Cable |
| 8 | HMD62 RH+T Duct Transmitter, ±1.5 %RH, 4...20 mA |
| 9 | HMD62 RH+T Duct Transmitter, ±1.5 %RH, 4...20 mA |
| 10 | TMD62 Temperature Duct Transmitter, ±0.1 °C, 4...20 mA |
| 11 | DMT152 C1DBY11A400A1X DMT152 Transmitter for Low Dewpoint with a measurement range of -80 to -20°C Mechanical Connection: UNF 3/4 -16 Thread Measurement Parameters • Td/f, ppm Analog Output Ch1 & Ch2 + RS-485 as Standard: 4...20 mA Ch1: -80...+20 °C Td/f Ch2: free scaling ppm, please define: Metric Units Pressure Setting for ppm Calculation: Ambient Pressure 1 bar(a) 14.76 psi(a) Sensor Protection: Mesh Filter 18um Stainless Steel Cable for Analog Outputs and Power Supply (Port I): Shielded Cable, 5.0m, 4-pin M8 Female Straight No Cable for RS485 Line and Power Supply (Port II) No Installation Accessories ONLY for ISO1/2" Thread No Special Labels Cardboard Box Quick Reference Guide DMT152 |
| 12 | INDIGO80B1N1A1N0 Handheld Indicator Power Supply Unit: Euro AC-adapter, including USB-C cable Indicator Accessories: Magnetic hanger for Indigo80 handheld indicator ASM214318SP No Connection Cables for Transmitters Connection Cables for Probes: M12-M12 Probe Connection Cable 272075SP Weatherproof Carrying Case for Indigo80 and HMP80 and DMP80 Series Probes ASM214759 Housing colour option grey |
| 13 | DMP80 BN1A0AS0 Handheld Dew Point Probe Probe with Range [-70 ... +60°C Td], DRYCAP®180M sensor Mechanical connection, NPT 1/2'' thread Probe connection cable: M12-M12 Probe Connection Cable 272075SP Filter option for probe head No Accessories for ISO G1/2'' thread Multilingual quick guide Standard factory calibration |
| 14 | HMP60 C12A1A1A0 Humidity and Temperature Probe, ±3 %RH Output Signal: 0 ... 5 V Ch1: RH (0...100%)/ Ch2: T -40...+60 °C Sensor Protection: Plastic Grid with Filter DRW010525SP Mouting Accessories: Pair of plastic nuts 18350SP Humidity Sensor: Intercap sensor No Probe Cable Length No User's Guide/ No Converter |
| 15 | HMP60 C12A1A4A0 Humidity and Temperature Probe, ±3 %RH Output Signal: 0 ... 5 V Ch1: RH (0...100%)/ Ch2: T -40...+60 °C Sensor Protection: Plastic Grid with Filter DRW010525SP Mouting Accessories: Pair of plastic nuts 18350SP Humidity Sensor: Intercap sensor Probe Cable Length: Shielded Cable, 1.5 m, High Temp 225777SP No User's Guide/ No Converter |
| 16 | HMP60 C12A1AFA0 Humidity and Temperature Probe, ±3 %RH Output Signal: 0 ... 5 V Ch1: RH (0...100%)/ Ch2: T -40...+60 °C Sensor Protection: Plastic Grid with Filter DRW010525SP Mouting Accessories: Pair of plastic nuts 18350SP Humidity Sensor: Intercap sensor Probe Cable Length: FEP Shielded Cable 180°C, 3m No User's Guide/ No Converter |
| 17 | PTU300 71E11A1BBPB1A0A1A3B0B0A Pressure, Humidity and Temperature Transmitter with Display Cover PTU307 for demanding meteorological installations Pressure Range: Baro-1 Module ClassA 500-1100 hPa,1pcs BARO-1 Probe Cables, Humidity and Temperature: HMP307 Probe with 2m Cable (+180°C) Standard power supply, 10...35 VDC 24 VAC Analog Output (CH1,CH2) Output 4...20mA Ch1: RH 0...100%RH Ch2: RH 0...100%RH Ch3: Channel 3 P (Full pressure range) Analog Output Range for Temperature: T -40...+60 °C (-40...+140 °F) PTU200 Output Format Standard Metric Units Cable Bushings: Cable Gland, Metal, EMC M20x1.5/6mm, 8.0 - 11.0mm, Ms/Ni/TPE/NBR, IP68 Pressure Fitting: Pressure Connector M5 (10-32) No Transmitter Installation Humidity Sensor: Composite Sensor HUMICAP180C Sensor protection: DRW010281 PPS Grid with steel Netting No Installation Kit for Probe User´s Guide PTU300 |
| 18 | INDIGO80A0N0A1N0 Handheld Indicator Power supply unit: USB-C cable only, no AC-adapter No Indicator Accessories No Connection Cables for Transmitters No Connection Cables for Probes Weatherproof Carrying Case for Indigo80 and HMP80 and DMP80 Series Probes ASM214759 Housing colour option grey |
| 19 | HMP80 N0E1S0 Handheld Humidity and Temperature Probe Probe (106 mm) with HUMICAP R2C Sensor Probe connection cables: M12-M12 Probe Connection Cable 272075SP Slotted MIM Filter with Membrane ASM214606SP Multilingual quick guide Standard factory calibration |
| 20 | INDIGOCABLE3M Probe Connection Cable, M12-5F - M12-5M, 3 m |
| 21 | HM42 Handheld Humidity and Temperature Meter with HM42PROBE |
| 22 | HM42PROBE 4 mm Stainless Steel Measurement Probe for HM40 |
| 23 | INDIGO520 A1A1A2NAAN INDIGO520 Transmitter with Display Power Supply and Output: 15...35VDC / 24VAC Barometer Module 500...1100hPa Class A Signal Cable Lead-through: Metal Cable Gland for 5-9 mm Cable Cable Gland for One Probe Probe Cable 3m CBL210896-3MSP Standard mounting kit Multilingual Quick Guide |
| 24 | HMP1 Wall-Mounted Humidity and Temperature Probe |
| 25 | HMW92D RH + T Wall mount Transmitter, ±1.7 %RH, 4...20 mA, with Display |
| 26 | HMT370EX 11A1NB1BA4NN Intrinsically Safe Humidity and Temperature Transmitter HMT370EX HMP371 Probe for Wall Mounting IECEx Certificate for HMT370EX and HMP370EX (Global) HMP371: Fixed Probe, max 60°C Plastic grid & SST net filter, All probes DRW010281SP No Probe Accessories Transmitter with Display and Keypad, must be protected against direct sunlight to maintain EX-protection! Metric Units Ch1: RH (0...100%) Ch2: T (0...+60 °C) Conduit Fitting M20x1.5 NPT1/2 265240SP No Transmitter Accessories HMT3601A22CBC1B4BA5A10 is obsolete |
| 27 | INDIGO80 B1A1N1N0 Handheld Indicator Euro AC-adapter, including USB-C cable INDIGO80EUROSP Magnetic hanger for Indigo80 handheld indicator ASM214318SP Connection Calbe for transmitters: M12-M8 Service Cable 262195SP No Carrying case Housing colour option grey |
| 28 | DMP80 AN1A0AS0 Handheld Dew Point Probe Probe with Range [-40 … +60 °C Td], DRYCAP®180S Sensor Mechanical connection, NPT 1/2'' thread M12-M12 Probe Connection Cable 272075SP Filter option for probe head No Accessories Multilingual Quick Guide Standard factory calibration |
| 29 | HPP272 AD0N0N Hydrogen Peroxide, Humidity and Temperature Probe 4..20 mA output signals scaling for ch1: H2O2 0...2000 ppm 4..20 mA output signals scaling for ch2: RH (H2O only) 0...100% No Special Features No Cable No Additional Options |
| 30 | 242659 USB Service Cable M12-5F, RS-485 |
| 31 | HMP113 M00B0C1A0 Humidity and Temperature Probe with plastic body and accuracy of ±1.5%RH |
| 32 | HMW110 2A3VA0NN RH + T Wall mount Transmitter, ±2 %RH, IP65 |
| 33 | TMI110 2DNV30NN Immersion Temperature Transmitter |
| 34 | 279725 Thermowell NPT, 203mm, OD8mm, ID6.2mm, 400C, 40bar, 1.4571 |
| 35 | HMD110 2A3VA0NN RH+T Duct Transmitter, ±2 %RH |
| 36 | TMD110 21NV01NN Duct Temperature Transmitter |
| 37 | WXT530 6U1B1A3D2B1A Weather Transmitter WXT530 Series |
| 38 | HPP272 AD0N0N Hydrogen Peroxide, Humidity and Temperature Probe 4..20 mA output signals scaling for ch1: H2O2 0...2000 ppm 4..20 mA output signals scaling for ch2: RH (H2O only) 0...100% No Special Features No Cable No Additional Options |
| 39 | HMT370EX 15A1NB1AB4AN Intrinsically Safe Humidity and Temperature Transmitter HMT370EX HMP371 Probe for Wall Mounting FM Certificate for HMT370EX (USA and Canada)HMP371: Fixed Probe, max 60°C Plastic grid & SST net filter, All probes DRW010281SP No Probe Accessories Transmitter with Display and Keypad, must be protected against direct sunlight to maintain EX-protection! Metric Units Ch1: RH (0...100%) Ch2: T (0...+60 °C) Mounting Plate HMT360 Mounting Compatible DRW253246SP No Transmitter Accessories HMT3601A22CBC1B4BA5A10 is obsolete |
| 40 | 210664SP Zener Barrier - Stahl part number 9001/51-280-091-141: 1 barrier per channel |
| 41 | DRW010522SP Sensor Protection Grid DRW010522 |
Gọi điện
Tin nhắn