ĐẠI LÝ PHÂN PHỐI CHÍNH THỨC METRIX - ANS VIETNAM

Digital Proximity System

	MX2033 3-Wire Driver Dynamic Voltage Output (mV/mm or mV/mil) Fully API 670 compliant
	MX2034 4-20 mA Transmitter Configurable for either: Radial vibration Axial position NEW Speed measurements
	MX8030 Proximity Probe NEW - Metrix* MX8030 probe series consist of 5mm and 8mm tip diameter probes with VibeLock™* connectors and Triaxial Cables. VibeLock™* ensures the proximity probe and extension cable connection is made properly and stays connected. No special tools are required. The Triaxial Cable provides an extra protective barrier for the proximity probe cable system to prevent excessive wear during installation.
	MX8031 Extension Cables NEW - MX8031 Extension Cable System comes standard with VibeLock™* and Triaxial Cables. The VibeLock™* feature ensures a proximity probe and extension cable connection is made properly and stays connected. No special tools are required. The Triaxial Cable provides an extra layer of protection to help prevent excessive wear during installation and in high vibration areas. The external shield of the Triaxial Cable is not used electrically, but it is used for additional physical cable / signal protection.
	MX2030 Probe Series 5 & 8mm tip diameter probes. Available in 5 and 9 meter system lengths.
	MX2031 Cable Series Extension cable available in 4, 4.5, 8 and 8.5 meters.

DPS Video

Installation & Training Video
Digital Proximity System (DPs)

Drivers

Metrix* proximity drivers are interchangeable with Bently Nevada®** Series 3300, 7200, and 3000 probes and cables. The flexible Metrix MX2033 Driver can be reconfigured to handle any of these probe / cable combinations.

MX2033 3-Wire Driver

Dynamic Voltage Output (mV/mm or mV/mil)

Fully API 670 compliant

5533 Probe Driver

Replacement for Bently Nevada** 7200 and 3000 Series.

Vibration Transmitters

Metrix* proximity vibration transmitters are compatible with Bently Nevada** Series 3300, 7200, and 3000 probes and cables as well as our own probes and cables. The flexible Metrix MX2034 Transmitter can be reconfigured to handle any of these probe / cable combinations.

	MX2034 4-20 mA Transmitter Configurable for either: Radial vibration Axial position NEW Speed measurements
	TXR 5521 RPM Transmitter Combines the proximity probe driver and signal conditioner for RPM or Phase Reference
	TXR Transmitter Radial Proximity Probe Transmitter
	TXA Transmitter Axial Proximity Probe Transmitter

Probes

Metrix* proximity probes are interchangeable with Bently Nevada** Series 3300, 7200, and 3000. All probes incorporate the latest technology and include agency approvals.

	MX8030 Proximity Probe NEW - Metrix* MX8030 probe series consist of 5mm and 8mm tip diameter probes with VibeLock™* connectors and Triaxial Cables. VibeLock™* ensures the proximity probe and extension cable connection is made properly and stays connected. No special tools are required. The Triaxial Cable provides an extra protective barrier for the proximity probe cable system to prevent excessive wear during installation.
	MX2030 Probe Series 5 & 8mm tip diameter probes. Available in 5 and 9 meter system lengths.
	10000 (3000) Probe Series .190 & .300mm tip diameter probes. Available in 15 ft. or 20 ft. lengths.
	10000 (7200) Probe Series: 5 & 8mm 5 & 8mm tip diameter probes. Available in 5 and 9 meter system lengths.
	10000 (7200) Probe Series: 11 mm 11mm tip diameter probes. Available in 5 and 9 meter system lengths.
	10026 (7200) Probes: High Pressure High Pressure probes can withstand pressures to 1000 PSI (6.89 MPa). Available in 5 and 9 meter system lengths.

Cables

Metrix* cables are interchangeable with Bently Nevada** cables Series 3300, 7200, and 3000. Available with or without armor in lengths to match your system requirements.

	MX8031 Extension Cables NEW - MX8031 Extension Cable System comes standard with VibeLock™* and Triaxial Cables. The VibeLock™* feature ensures a proximity probe and extension cable connection is made properly and stays connected. No special tools are required. The Triaxial Cable provides an extra layer of protection to help prevent excessive wear during installation and in high vibration areas. The external shield of the Triaxial Cable is not used electrically, but it is used for additional physical cable / signal protection.
	MX2031 Cable Series Extension cable available in 4, 4.5, 8 and 8.5 meters.
	3000 Series Cable Extension cable available in system lengths of 15 or 20 feet.
	7200 Series Cable (5 & 8 mm) Extension cable available in 4, 4.5, 8 and 8.5 meters.
	7200 Series Cable (11mm) Extension cable available in 4, 4.5, 8 and 8.5 meters.

Signal Conditioners

Metrix* proximity signal conditioners are used with existing drivers. They power the driver and scale the 4-20 mA output.

5510C Signal Conditioners

Use with Probe Driver for Shaft Radial Vibration.

5516C Signal Conditioners

Use with Probe Driver for Axial Position.

Accessories

A full line of accessories for mounting probes and WP or EP enclosures for drivers, transmitters and signal conditioners.

	Static Calibrator The static calibrator tool allows users to change their probe target material to match their specific probe system. Available for millimeters or micrometers.
	MX2040 Dynamic Signal Checker The MX2040 dynamically tests the vibration monitoring system loop by the simulation of rotor vibration.
	5497PM Probe Mounting System The Probe Mounting System works with reverse mount 8mm proximity probes. The system mounts on the machine surface for easy installation.
	5499 Heavy Duty Reverse Probe Mount Housing Required accessory for reverse mount probes. Provides physical protection to 1000 PSIG (6.89 MPa).
	7646 Probe Mounting Bracket Available for all standard probe sizes.
	1/2” NPT Threaded Hole Probe Holder Available for all standard probe sizes.
	3/4” NPT Threaded Hole Probe Holder Available for all standard probe sizes.
	5494 Feed Through Extension Cables Extension cables with High Pressure Cable Seal to 150 PSI used for 7200 Probe Series. Available as single or dual feed through.
	7876, 8172 and 8173 Weatherproof Housing NEMA 4 / IP 65 rated enclosures for 2, 4 or 8 units.
	7595 and 8156 Explosion Proof Housings Explosion-proof housing helps protect your proximity drivers, transmitters and signal conditioners in harsh environments. NEC & CSA rated for Class I, (C,D) & Class II (E, F & G), Div.1 areas.
	9041-XXXX Signal Cable Bulk cable for wiring probe drivers, monitors or signal conditioners.