HL-400 Công tắc mức bằng phao quay Towa seiden
Giá bán: Vui lòng liên hệ
Xuất sứ: Japan
Hãng sản xuất: Towa Seiden Vietnam
Gọi lại cho tôi
Gọi điện thoại đặt mua: 0902.337.066
ĐẠI LÝ CHÍNH THỨC TOWA SEIDEN-NHÀ PHÂN PHỐI ANS VIETNAM
TOWA SEIDEN Industrial Co., Ltd. was founded in Osaka in 1969 and has specialized in level instruments with sales bases in Shanghai, China, and Taipei, Taiwan, as well as in Osaka, Tokyo, Nagoya, and Kyushu. We have great confidence particularly in paddle type and capacitance type level switches in terms of their performance, production capacity and prices.
List code: Rotary Paddle Type Level Switch_Towa seiden vietnam
PRL-100/PRL-170 Standard
PRL-101 PROTECTION TUBE
PRL-100EB/PRL-100ED Extension shaft Vertical mounting
PRL-200 High temperature
PRL-500 Heavy duty
PRL-S7/PRL-G7-25 Explosion proof version
PA-1/PAF-1/PA-1E Conveyer flow switch
List code:
HL-400: Compact type Basic
HL-400G: Compact type Long shaft
Selectable sensitivity with dip switches,high, normal, low and extra-low,easy calibration.
Robustness against electrostatic stability, wide variety probe design.| TYPE | FEATURE | |
|---|---|---|
| CA-A1SA | Standard type | |
| CA-A3SA | Sliding sleeve | |
| CA-B1SA | High temperature | |
| CA-A1WA | High level point for solids | |
| CA-A4XA | Low level point for solids |
Level Switch, Flow Line Displacer
The float with the wire is moved up or down by buoyancy together with changes in water level. The magnet at the top of the wire detects the water level by enabling the built-in lead switch to open or close. The spring supports weight of wire and float and adjusts switching variations.
This lead switch is basically free from any influence of water ripple or flow thanks to the self-locking circuit and the balance weight at the bottom of the wire.
This lead switch is basically free from any influence of water ripple or flow thanks to the self-locking circuit and the balance weight at the bottom of the wire.
Model: FLD series
*Longer life thanks to improved mechanical construction.
*Ideal for oil and underground tanks.
* Alarm output enables level control and analog output(DC 4-20 mA) enables remote level monitoring.
* Pressure- and explosion-proof specifications (d2G4) enable measurement of solvent or dangerous liquid levels.
* Tank-top or side installation is selectable to suit your use.
*Ideal for oil and underground tanks.
* Alarm output enables level control and analog output(DC 4-20 mA) enables remote level monitoring.
* Pressure- and explosion-proof specifications (d2G4) enable measurement of solvent or dangerous liquid levels.
* Tank-top or side installation is selectable to suit your use.
List code:
LG-100
LG-102
LG-300
LGE-100
LGE-102
The sounding level meter accurately measures the level of bulk materials in silos or tanks.
Perfect for your stock control.
Perfect for your stock control.
List code:
ＴＬＸ－１２０ＡＰ1
ＴＬＸ－２００ＡＰ
Echo TREK-THE NEXT GENERATION-FOR LIQUIDS
Echo TREK ultrasonic transmitters offer the best in liquid level measurement in a compact simple package. Developed using the established SenSonic range of Nivelco narrow beam angle pulse echo transducers, Echo TREK units are available with measurement ranges up to 25 meters - with standard plastic, PTFE or stainless steel sensor faces. Installed on the tank roof, or above the liquid surface to be measured, the transmitter gives an analogue output proportional to liquid level. Initial set-up is achieved using the simple plug-in display module: then the intelligent QUEST+ process adaptive signal processing software system ensures that the electronics identifies and validates the liquid surface signal, giving reliable level monitoring
Echo TREK ultrasonic transmitters offer the best in liquid level measurement in a compact simple package. Developed using the established SenSonic range of Nivelco narrow beam angle pulse echo transducers, Echo TREK units are available with measurement ranges up to 25 meters - with standard plastic, PTFE or stainless steel sensor faces. Installed on the tank roof, or above the liquid surface to be measured, the transmitter gives an analogue output proportional to liquid level. Initial set-up is achieved using the simple plug-in display module: then the intelligent QUEST+ process adaptive signal processing software system ensures that the electronics identifies and validates the liquid surface signal, giving reliable level monitoring
Echo TREK-THE NEXT GENERATION-FOR SOLIDS
A surprise from Nivelco - the experts in solids level measurement. EchoTREK compact level transmitters featuring SenSonic narrow beam angle transducers are offered for solids level monitoring - where previously only more complex, two part systems have performed. With the high efficiency SenSonic transducers, giving superb signal transmission, plus the QUEST+ software, using advanced process adaptive signal processing for reliable echo monitoring, EchoTREK units overcome filling noise, dusting and irregular surface formations in most cases to give a high performance, compact, powder and solids level measurement transmitter.
A surprise from Nivelco - the experts in solids level measurement. EchoTREK compact level transmitters featuring SenSonic narrow beam angle transducers are offered for solids level monitoring - where previously only more complex, two part systems have performed. With the high efficiency SenSonic transducers, giving superb signal transmission, plus the QUEST+ software, using advanced process adaptive signal processing for reliable echo monitoring, EchoTREK units overcome filling noise, dusting and irregular surface formations in most cases to give a high performance, compact, powder and solids level measurement transmitter.
Fork type for grain
Fork level switch vibration enables piezoelectric elements to vibrate by an electronic circuit converting movement to mechanical vibration. An internal electronic circuit determines current state and outputs it to a relay when the easured
object contacts the vibrating fork detector, regulating vibration.
object contacts the vibrating fork detector, regulating vibration.
RRH-300 series
RFM-300 series
Rod type for power, grain or mass
Rod level switch vibration enables piezoelectric elements to vibrate by an electronic circuit converting movement to mechanical vibration. An internal electronic circuit determines current state and outputs it to a relay when the easured
object contacts the vibrating fork detector, regulating vibration.
object contacts the vibrating fork detector, regulating vibration.
RKH-500 series
RKH-502
Fork type for liquid, obtaining GL standard for ships
Fork level switch vibration enables piezoelectric elements to vibrate by an electronic circuit converting movement to mechanical vibration. An internal electronic circuit determines current state and outputs it to a relay when the measured object contacts the vibrating fork detector, regulating vibration.
RFM-400 series
Gọi điện
Tin nhắn