DGM-200-Thiết đo CO2 trong chai, lon-Canneed Vietnam-AnsVietnam
Giá bán: Vui lòng liên hệ
Hãng sản xuất: Canneed Vietnam
Gọi lại cho tôi
Gọi điện thoại đặt mua: 0902.337.066
ANS Vietnam - Địa lý phân phối Canneed Vietnam
| Canneed Vietnam | BCC-200 |
| Digital Beverage CO2 Calculator | |
| Canneed Vietnam | DGM-200 |
| Digital Beverage CO2 Calculator | |
| Canneed Vietnam | Seam Sight-B |
| Full Automatic Seam Monitor | |
| * To test beverage cans | |
| Canneed Vietnam | CSS-1000 |
| Anti-noise Seam Saw | |
| Canneed Vietnam | CSG-200 |
| Countersink Gauge (Digital) | |
| Suitable for end types from 113 to 307 | |
| Canneed Vietnam | STG-200-D |
| Seam thickness gauge(digital) | |
| Applicable for can diameters of 50-190mm | |
| Canneed Vietnam | TRC-200 |
| Transporter of Computer | |
| With two ports | |
| Canneed Vietnam | CMDI |
| Cable for Mitutoyo Digital Indicator | |
| Canneed Vietnam | CMD-200S |
| Can Measure Desk for Rear Stations | |
| Canneed Vietnam | CAN-10774 |
| Planer and Shaper Pin Height Gauge | |
| CAN-10774-L77 , 77mm testing stick. | |
| Range:10mm-106mm | |
| Canneed Vietnam | CAN-1050-D |
| Digital Can Closing Force Gauges | |
| Canneed Vietnam | Accessory |
| CAN-1050.A** | |
| Adapters of CAN-1050-D for END dia. 59.44mm and 57.4mm. | |
| Canneed Vietnam | Accessory |
| CAN-1050.P** | |
| Space blocks of CAN-1050-D | |
| for can heights of 91.5 mm, 133 mm, 168 mm, | |
| 145.4 mm, 104.5 mm, 115.5 mm, 109.5 mm | |
| Canneed Vietnam | Canneed-CSS-P3 |
| Portable Seam Saw | |
| with saw blade 63×0.5mm×120TX16 (CSS.488) | |
| Canneed Vietnam | PDO-100 |
| Portable Dissolved Oxygen Meter | |
| Canneed Vietnam | BPT-4000 |
| Ramp Pressure Tester (two stations) | |
| Canneed Vietnam | CND-BPT4-1.0 |
| Software BPT-4000 glass?bottle?pressure | |
| testing? machine | |
| Canneed Vietnam | Replaced Model: DGM-200 |
| Digital Beverage CO2 Calculator | |
| Note: Canneed upgraded the battery and the program of DGM-200. | |
| (DGM-100) | |
| Canneed Vietnam | AS-300D |
| Digital AutoShaker Beverage CO2 Calculator | |
| Canneed Vietnam | TLT-200 |
| Top Load Tester | |
| Canneed Vietnam | TLT-200-H** |
| Space block of TLT-200 | |
| Canneed Vietnam | TLT-CAL |
| Calibration Cell for TLT-200 | |
| Canneed Vietnam | CSM-208 |
| Can Seam Micrometers (Fine-tuning) | |
| Canneed Vietnam | CVG-200 |
| Canners Vacuum Gauge | |
| Include Analog vacuum gauge(with piercing | |
| head), seal colloid, and rack plate | |
| Canneed Vietnam | CanNeed-TDET-100 |
| Data Transmitter | |
| Canneed Vietnam | TDE-100-C** |
| Temperature probe | |
| Canneed Vietnam | TDE-100-CD** |
| Can Fixture | |
| Canneed Vietnam | Seam Sight-B |
| Full Automatic Seam Monitor | |
| Canneed Vietnam | CSS-1000 |
| Anti-noise seam saw | |
| Canneed Vietnam | STG-200-D |
| Seam thickness gauge(digital) | |
| Applicable for can diameters of 50-190mm | |
| Canneed Vietnam | CSG-200 |
| Countersink Gauge (Digital) | |
| Suitable for end types from 113 to 307 | |
| Canneed Vietnam | TRC-200 |
| Transporter of Computer | |
| With two ports | |
| Canneed Vietnam | CMDI |
| Cable for Mitutoyo Digital Indicator | |
| Canneed Vietnam | CAN-SST-300 |
| Secure seal tester,3 head | |
| Canneed Vietnam | SST-C1 |
| Concave piercing head | |
| Canneed Vietnam | SST-S22X25X25 |
| Rubber seal column, 21.7mm | |
| Applicable for PET bottle with mouth inner diameter of 21.7, SST.056 | |
| Canneed Vietnam | ST-C25 |
| Pressure fixture assembly, 25mm | |
| Applicable for measuring the PET bottle neck diameter =26mm, including #25 fixture, 25/28 space plate and connecting pipe | |
| Canneed Vietnam | SST-K28 |
| 28mm Cut-off tool | |
| Applicable for cutting bottle neck =28mm | |
| Canneed Vietnam | HWC-100 |
| Hot Wire Bottle Cutter | |
| Suitable for Max bottle dia 100mm, Max bottle | |
| height 370mm | |
| Canneed Vietnam | CanNeed-TDET-100 |
| Data Transmitter | |
| Canneed Vietnam | TDE-100-CD** |
| Can Fixture | |
| Canneed Vietnam | TDE-100-C** |
| Temperature probe | |
| Probe length is **mm | |
| Canneed Vietnam | Seam Sight-B |
| Full Automatic Seam Monitor | |
| Canneed Vietnam | CSS-1000 |
| Anti-noise seam saw | |
| Canneed Vietnam | STG-200-D |
| Seam thickness gauge(digital) | |
| Applicable for can diameters of 50-190mm | |
| Canneed Vietnam | CSG-200 |
| Countersink Gauge (Digital) | |
| Suitable for end types from 113 to 307 | |
| Canneed Vietnam | TRC-200 |
| Transporter of Computer | |
| With two ports | |
| Canneed Vietnam | CMDI |
| Cable for Mitutoyo Digital Indicator | |
| Canneed Vietnam | CAN-SST-300 |
| Secure seal tester,3 head | |
| Canneed Vietnam | SST-C1 |
| Concave piercing head | |
| Canneed Vietnam | SST-S22X25X25 |
| Rubber seal column, 21.7mm | |
| Applicable for PET bottle with mouth inner diameter of 21.7, SST.056 | |
| Canneed Vietnam | ST-C25 |
| Pressure fixture assembly, 25mm | |
| Applicable for measuring the PET bottle neck diameter =26mm, including #25 fixture, 25/28 space plate and connecting pipe | |
| Canneed Vietnam | SST-K28 |
| 28mm Cut-off tool | |
| Applicable for cutting bottle neck =28mm | |
| Canneed Vietnam | HWC-100 |
| Hot Wire Bottle Cutter | |
| Suitable for Max bottle dia 100mm,Max bottle | |
| height 370mm | |
| Canneed Vietnam | CanNeed-TDET-100 |
| Data Transmitter | |
| Canneed Vietnam | TDE-100-C** |
| Temperature probe | |
| Probe length is **mm | |
| Canneed Vietnam | KZJ-106-0501 |
| KZJ-SST-2 main unit (TO INCLUDE | |
| 106-0205-T,106-MAN): | |
| Secure Seal Tester | |
| Canneed Vietnam | SST-C1 |
| Concave piercing head | |
| Applicable for piercing crown caps and PET | |
| bottle caps and so on. | |
| Canneed Vietnam | SST-C25 |
| Pressure fixture assembly, 25mm | |
| Applicable for measuring the PET bottleneck | |
| diameter =26mm, including #25 fixture, 25/28 space plate, and connecting pipe | |
| Canneed Vietnam | SST-S20.8X25X25 |
| Rubber seal column, 20.3mm | |
| Applicable for PET bottle with mouth inner | |
| the diameter of 20.3, SST.058 | |
| Canneed Vietnam | SST-K32 |
| 32mm Cut-off tool | |
| Applicable for cutting bottle neck <=32mm | |
| Canneed Vietnam | ND-SST-3 |
| Secure Seal Tester | |
| Canneed Vietnam | SST-C1 |
| Concave piercing head | |
| Applicable for piercing crown caps and PET | |
| bottle caps and so on. | |
| Canneed Vietnam | SST-C25 |
| Pressure fixture assembly, 25mm | |
| Applicable for measuring the PET bottleneck | |
| diameter =26mm, including #25 fixture, 25/28 space plate, and connecting pipe | |
| Canneed Vietnam | SST-S20.8X25X20 |
| Rubber seal column, 20.3mm (short) | |
| Applicable for PET bottle (short cap) with | |
| mouth inner diameter of 20.3, SST.030 | |
| Canneed Vietnam | SST-K32 |
| 32mm Cut-off tool | |
| Applicable for cutting bottle neck =32mm | |
| Canneed Vietnam | Seam Sight-B |
| Full Automatic Seam Monitor | |
| * To test beverage cans | |
| Canneed Vietnam | CSS-100B |
| Anti-noise seam saw | |
| Suitable for cans with diameter 65mm | |
| Canneed Vietnam | STG-200-D |
| Seam thickness gauge(digital) | |
| Applicable for can diameters of 50-190mm | |
| Canneed Vietnam | CSG-200 |
| Countersink Gauge (Digital) | |
| Suitable for end types from 113 to 307 | |
| Canneed Vietnam | CMDI |
| Cable for Mitutoyo Digital Indicator | |
| Canneed Vietnam | TRC-200 |
| Transporter of Computer | |
| With two ports | |
| Canneed Vietnam | MDER-10 |
| Multi-station Digital Enamel Rater for Ends (10 | |
| Stations) | |
| Canneed Vietnam | MDER-S202 |
| 202 Sealing element for MDER | |
| 10pcs/set, DER.114 | |
| Canneed Vietnam | DER.121 |
| 200 End Sealing Element for MDER | |
| 10pcs/set | |
| Canneed Vietnam | DER-400-M |
| Digital Enamel Rater Mainframe | |
| Canneed Vietnam | DER-CH-2P-N |
| Can Holder(for 2P cans) | |
| For DER-400 | |
| Canneed Vietnam | CMD-200S |
| Can Measure Desk for Rear Stations | |
| Can Measure Desk for Rear Stations | |
| To test the flange width, can height, inner | |
| Diameter.4 stations. | |
| Equipped with digital Mituyoto dial indicator | |
| With adapter and cable, data can be output to | |
| PC or SPC | |
| Canneed Vietnam | Seam-Xline-100 |
| Seam-X®-Line-100 Automatic X-ray | |
| Seam Scanner (Non-destructive &Auto Sampling) | |
| Canneed Vietnam | Seam Sight-B |
| Full Automatic Seam Monitor | |
| Canneed Vietnam | CSS-100B |
| Anti-noise seam saw | |
| Suitable for cans with diameter 65mm | |
| Canneed Vietnam | STG-200-D |
| Seam thickness gauge(digital) | |
| Applicable for can diameters of 50-190mm | |
| Canneed Vietnam | CSG-200 |
| Countersink Gauge (Digital) | |
| Suitable for end types from 113 to 307 | |
| Canneed Vietnam | CMDI |
| Cable for Mitutoyo Digital Indicator | |
| Canneed Vietnam | PEPT-100 |
| Perpendicularity Tester for PET Bottle (Digital) | |
| Include Mitutoyo digital indicator, calibration column; applicable for measuring the max.height 340mm, the diameter is less 115mm | |
| Canneed Vietnam | HWC-100 |
| Hot Wire Bottle Cutter | |
| Suitable for Max bottle dia 100mm,Max bottle | |
| height 370mm | |
| Canneed Vietnam | |
| Canneed Vietnam | CSS-1000 |
| Anti-noise seam saw | |
| Canneed Vietnam | KZJ-106-0501 |
| KZJ-SST-2 main unit (TO INCLUDE | |
| 106-0205-T,106-MAN): | |
| Secure Seal Tester | |
| Canneed Vietnam | CAN-10774 |
| Planer and Shaper Pin Height Gauge | |
| CAN-10774-L77, 77mm testing stick. | |
| Range:10mm-106mm | |
| Canneed Vietnam | SST-C1 |
| Concave piercing head | |
| Applicable for piercing crown caps and PET | |
| bottle caps and so on. | |
| Canneed Vietnam | SST-C25 |
| Pressure fixture assembly, 25mm | |
| Applicable for measuring the PET bottleneck | |
| diameter =26mm, including #25 fixture, 25/28 space plate, and connecting pipe | |
| Canneed Vietnam | SST-S20.8X25X25 |
| Rubber seal column, 20.3mm | |
| Applicable for PET bottle with mouth inner | |
| the diameter of 20.3, SST.058 | |
| Canneed Vietnam | Model: SST-K32 |
| 32mm Cut-off tool | |
| Applicable for cutting bottle neck <=32mm | |
| Canneed Vietnam | CND-SST-3 |
| Secure Seal Tester | |
| * Main unit of CND-SST-3, blue panel & stand | |
| column, high-quality pressure valve, includes | |
| water tank | |
| * Not include piercing head, rubber seal | |
| column, PET bottle cap clamps, cut-off tool | |
| Canneed Vietnam | BWTG-200 |
| Bottle Wall Thickness Gauge (Digital) |
Gọi điện
Tin nhắn