ANS Vietnam hân hạnh giới thiệu đến quí khách sản phẩm mà chúng tôi là đại lý phân phối chính thức:

Hãng: Electro sensor 

Model: 1101 Hall Efect Sensor 


Stainless Steel Hall Effect


  •   NPN open collector, square-wave output
  •   Zero speed operation with no signal loss
  •   Non-contact, large gap distance sensing 
  •   Signal transmits up to 1,500 ft 
  •   Simple to install and set up
  •   Powered by 5-24 VDC

The 1101 Hall Effect sensor has a non-threaded stainless steel body, is supplied with a mounting bracket and 10 ft of 3-conductor shielded cable. It is commonly used with pulser discs or 60 pulses/rev magnet wheels.

These speed sensors use magnet-sensing Hall Effect IC's to produce a digital pulse signal to interface with speed switches, tachometers, counters, signal conditioners, or PLC's. Hall Effect sensors provide true zero speed operation with square-wave output and immunity to electrical noise.

A pulser disc or split collar pulser wrap with embedded magnets is mounted on the monitored shaft. As the shaft rotates, the magnets pass in front of the sensor causing the sensor to switch high and low, thus producing a digital pulse output. The sensors provide a digital square wave signal with a 50/50 duty cycle when used with pulse generators that have evenly spaced magnets of alternating polarities, such as Electro-Sensors Model 255 Pulser Disc. The recommended gap distance between the sensor and pulse generator is 1/4 inch +/- 1/8 inch. The gap flexibility makes the sensors tolerant of vibration, shaft run-out, misalignment, and industrial environments.

Model Part Number
1101, 18-36 V, Hi Temp, 10' PVC Cable,
w/ Bracket 775-110001
1101RK, 3.75", 10' PVC Cable, w/o Bracket
(Used on Ring Kits) 775-110003
1101, 2.0", 10' PVC Cable, w/o Bracket 775-110100
1101, 2.0", 50' PVC Cable, w/ Bracket 775-110101
1101, 2.0", 50' PVC Cable, w/o Bracket 775-110105
1101, 2.0", 50' PVC Cable, w/ Bracket 775-110106
1101, 2.0", 100' PVC Cable, w/o Bracket 775-110110
1101, 2.0",100' PVC Cable, w/Bracket 775-110111
1101, 2.0", 10' Teflon Cable w/o Bracket 775-110114
1101, 2.0",10' Teflon Cable w/ Bracket 775-110121

System Options Part Number
Standard 255 Nylon Pulser Disc,
4" Diameter, 16 Magnets 700-000200

Other Options Part Number
1100 Sensor Series Mounting Bracket 725-004000

Hãy liên hệ với chúng tôi để được hỗ trợ giá tốt nhất!!!

Hot line: 0916551124  (@ Duyên)
Sky: duyen_ans

Blogger | Sites | Wordpress

ANS VIETNAM là một trong những Công ty hàng đầu chuyên cung cấp máy móc, thiết bị cho ngành công nghiệp, điện công nghiệp và điều khiển tự động của các hãng nổi tiếng :Celduc Vietnamsterilair vietnamVaisala VietnamBalluff VietnamMetrix VietnamKofloc VietnamMeister VietnamAGR VietnamElectro Sensor VietnamMts Sensor VietnamHans Schmidt VietnamFMS VietnamIMO VietnamSanko Denshi VietnamTakuwa VietnamTowa Seiden VietnamPCB Vietnam,…