West Controls Solutions là công ty chuyên môn về kiểm soát nhiệt độ và quy trình| Đại lý West Control Solutions Vietnam

1/ Tổng quan về West Controls Solutions  | West Controls Solutions Vietnam

west cs vietnam logo

West Controls Solutions (West CS) là công ty chuyên môn về kiểm soát nhiệt độ và quy trình  bao gồm 4 công ty nhỏ :  PMA, West Instruments ,CAL Controls & Partlow. Với sự kết hợp nguồn lực và kiến ​​thức chuyên môn của 4 công ty ưu tú này , West-cs  tự hào cung cấp các sản phẩm hiệu quả, tiết kiệm chi phí và chất lượng cao mà thị trường tự động hóa ngày nay đang đòi hỏi.

ANS là đại lý chính thức hãng West Controls Solutions  | West CS Vietnam

2/ Bộ điều khiển nhiệt độ dạng PID Hãng PMA - KS 50-1 / KS 52-1 - PMA PID Temperature Controller | West Controls Solutions Vietnam

Bộ điều khiển nhiệt độ KS 50-1 West Controls đa năng dành cho các ứng dụng điều khiển chính xác và tiết kiệm chi phí. Thiết bị cung cấp khả năng điều khiển 2 điểm (bật / tắt) đơn giản, điều khiển PID liên tục hoặc điều khiển bước 3 điểm. Tín hiệu giá trị quá trình được kết nối thông qua một đầu vào đa năng. Một đầu vào analog bổ sung có thể được sử dụng để đo nhiệt độ hiện tại hoặc nhận tín hiệu analog từ bên ngoài đưa vào.

KS 50-1 có 3 ngõ ra :  3 rơ le hoặc 2 rơ le cộng với một ngõ ra phổ thông. Đầu ra đa năng này có thể được sử dụng để vận hành rơ le bán dẫn, đầu ra dòng điện / điện áp liên tục hoặc để cung cấp năng lượng cho bộ truyền tín hiệu hai dây. Tùy chọn có hai ngõ ra optocoupler bổ sung có thể được sử dụng tự do.

Bộ điều khiển phù hợp với một số ứng dụng trong ngành bao gồm:

  • Lò nung và lò nướng
  • Đầu đốt và nồi hơi
  • Chế biến nhựa
  • Máng ra thép nóng
  • Lò xấy
  • Buồng điều hòa
  • Nhà máy xử lý nhiệt

Temperature Controller KS 50-1, KS 52-1 - PMA PID Temperature Controller West cs VietNam

Datasheet bộ điều khiển nhiệt độ KS 50-1 tại đây

The universal KS 50-1 temperature controller is intended for precise and cost-effective control tasks. The instrument provides simple 2-point (on/off) control, continuous PID control or 3-point stepping control. The process value signal is connected via a universal input. A supplementary analog input can be used for heating current measurement or as an external set-point input.

The KS 50-1 has three process outputs that can be 3 relays or 2 relays plus a universal output. This universal output can be used for operating a solid-state relay, a continuous current/voltage output or to energize a two-wire transmitter. Optionally there are two additional optocoupler outputs that can be used freely.

The controller is suitable for a number of industry applications including:

  • Furnaces and ovens
  • Burners and boilers
  • Plastics processing
  • Hot runners
  • Driers
  • Climatic chambers
  • Heat treatment plants

Benefits & Features -  Đăc tính nổi bật của bộ điều khiển nhiệt độ KS45

  • Universal continuous/switching version, i.e. reduced stocks
  • 100 ms cycle time, i.e. also suitable for fast control loops
  • 20ms as shortest pulse for very fast / strong actuators 
  • Freely configurable analog output, e.g. as process value output
  • Customer-specific linearisation for all sensors
  • Settings can be blocked via password and internal switch for high security
  • Extended temperature range up to 60 °C allows mounting close to the process
  • Easy 2-point or offset measurement correction
  • Emergency operation after sensor break by means of the “output hold“ function
  • Logical combination of digital outputs, e.g. for general alarm
  • Programmer with 10 segments and “end“ signal
  • RS 422/485 Modbus RTU interface
  • Built-in transmitter power supply
  • Splash-water proof front (IP 65)

Specification – Thông số kỹ thuật :

  • Product Category:           Single Loop Controller
  • Dimensions and size:      KS 50-1 Format 48 x 96

            KS 52-1 Format 96 x 96

  • Connectors:       Pin or screw terminals
  • Primary Input Type:        Universal (TC, RTD, DC linear mA/mV)
  • Other Inputs:     External setpoint, Heating current monitoring
  • Output Type:     Relay, Logic, Continuous, Optocoupler
  • Max. Number of Outputs:           3
  • Scan Time:          100 ms
  • Control Type:     2-point (on/off), continuous PID control, or 3-point stepping
  • Number of Programmer Segments:        10
  • Power Supply:   90-260 VAC, 20,4-26,4 VAC: Frequency 48-62 Hz,
  • 18-31 V DC
  • Communications:             Modbus RS422/485
  • Panel Sealing:    IP65
  • Certifications:    CE, cULus, DIN EN 14597, GOST-R
  • Software Tools:                BlueControl

    Thông tin phụ kiện đi kèm :

  • Current converter 50A AC  : 9404-407-50001
  • PC adapter, for connecting the BlueControl software to the BluePort :  9407-998-00001
  • Standard rail adapter:  9407-998-00061
  • Operating manual English :  9499-040-62811
  • BlueControl Basic :  9407-999-11001
  • BlueControl Expert : 9407-999-11011
  • BlueControl Universal : 9407-999-19011

    Xem thêm sản phẩm West Controls Solutions tại đây