zahmnagel VietNam, zahmnagel ANS VietNam, Z&N VietNam, Z&N ANS VietNam, ANS VietNam

 Series #1000:  Zahm SS-60 CO2 Volume Meter

The volume meter determines average C02 levels of gas that is stored in the tanks.  A piston release eliminates sample bleed off and the possibility for human error.  Samples go through repeated volume expansion which results in more accurate measurements.  The meter is lightweight and made of stainless steel.  The thermometer may be replaced in the field by the user.  The SS-60 volume meter comes complete with clamping device and handles.

1000

SS-60 Volume Meter

1017

Thermometer Guard Screw (2 ea.)

1040

Vent Cock Swivel

1001

Body

1018

Thermometer Cushion Ring (2 ea.)

1042

Aspirator Bulb

1002

Base

1019

Thermometer Seal Ring (2 ea.)

1042-A

Aspirator Bulb "O" Ring

1003

Base Shield

1020-B

Valve (2 ea.)

1045

Gooseneck

1004-A

Neck Shield

1021

Clamping Device Assembly

1048

Clamp Handle Assembly

1005

Piston

1022

Clamping Device Body

1048-1

Front Brace

1006

Piston Body

1023

Clamping Device Yoke

1048-2

Milled Brace

1007

Piston Handle

1024

Clamping Device Screw

1048-3

Rear Brace (2 ea.)

1008

Piston Lock Pin

1025

Clamping Device Gasket

1048-4

Screw - Left Side (2 ea.)

1009

Piston "O" Ring

1029

Pressure Guage

1048-4A

Screw - Right Side (2 ea.)

1010

Piston Body Gasket

1036

Sight Glass

1048-5

Lock Washer (6 ea.)

1011

Base Screw (6 ea.)

1037

Sight Glass Cage

1048-6

Cap Nut (4 ea.)

1012

Thermometer

1038-A

Sight Glas Gasket (Top)

1048-7

Handle w/Rubber Sleeve (2 ea.)

1016

Thermometer Guard

1038-B

Sight Glass Gasket (Bottom)

 

 

 

 

Series #2037/3000/4000:  Zahm Clamping Device/Sample Bottle/COGas Header

The sample bottle along with the CO2  gas header and clamping device allows the user to take carbonated beverage samples from a tank without the introduction of extraneous air or loss of gas.

2037

Clamping Device Complete

2038

Neoprene Gasket (Cut)

2039

Swivel Nut

2041

U-Bolt Body

2042

Screw (2 Req'd)

2043

Dowel (2 Req'd)

2044

Bronze Ball (Set of 36)

2045

Nut-U-Bolt

2046

U-Bolt

1025

Gasket

 

 

3000

Sample Bottle Complete (3001-3003)

3001

Bottle Only

3002A

Inlet Valve (Teflon Plug)

3003

Bleeder Valve

 

 Series #5000: Zahm New Style Air Tester

This air tester is recommended for use in testing air content where greater accuracy and speed are required.  The instrument automatically adjusts to different size bottles and cans.  It is available in one or three liter size.

 

5001

Air Tester Complete W/All Accessories

5003-25

Burette W/Teflon Stopcock (o-25ml) 0-100ML Capacity

5005

Replacement Teflon Stopcock

5006

Burette Clamp Complete (5007 Through 5014)

5007

Clamp Slide

5008

Thumb Screw

5009

Support Band

5010

Clamp Band

5011

Screw (2 Req'd)

5012

Wing Nut

5013

Screw

5014

Plastic Band

5016

Support Rod

5017

Guide Rod (2 Req'd)

5020

Base

5022

Base Pad (Top)

5022A

Base Pad (Bottom)

5024

Cross Bar

5026

Lock Plate (2 Req'd)

5027

Lock Spring (2 Req'd)

5028

Lock Screw (2 Req'd)

1030

Pressure Gauge (0-60psi & 0-4.2kg/cm2)

5038

Gauge Gasket

5039

Gauge Adapter

5040

Adapter Gasket

5042-A

Piercing Needle (.703 OAL Piercing Point-STD.)

5043

Packing Nut

5044

Nut Gasket

5045

Rubber Seal

5046

Rubber Coupling

5047

Level Bottle (250ml)

5050

Level Bottle Stand (250ml)

5052

Connection Tube (30")

5053

Can Stop (2 Req'd)

5054

Can Stop Screw (2 Req'd)

5055

Whitey Valve Only-Plated

5056

Whitey Valve W/5057 Nipple & 5058 Nut

5057

Hose Nipple

5058

Nipple Nut

5079

Caustic Trap

5080

Plastic Coupling

 

 

Model 5001:  Air tester complete with burette and pressure gauge.  The unit accommodates bottles or cans up to one liter size.

Model 5002:  Air tester complete with burette and pressure gauge.  The unit accommodates bottles or cans up to three liter size.

 Series #6000:  Zahm Model D-T Piercing Device

The piercing device measures C02 gas volumes in bottles and cans.  Two pressure/temperature relationship charts are furnished to provide accurate and rapid gas volume measurements in alcoholic and non-alcoholic beverages.  The device is available in one or three liter sizes.

6001

CO2 Tester Complete W/#6003 Dial Thermometer & #1030 Pressure Gauge

6003

Dial Thermometer 2" Dial, Dual Scale (25/125 F -5/55 C.) 8" Long Stem, Adjustable

6006

Dial Thermometer Stop

6007

Dial Thermometer Adapter

6008

Adapter "O" Ring

6009

Adapter Nut

6011

Piercing Needle .703 OAL of Piercing Point

6013

Rubber Seal

6018

Cross Bar For 1 Litre Size

5017

Guide Rod

5020

Base 1 Litre Size

5022

Base Pad (Top) For 1 Litre Base

5022-A

Base Pad (Bottom) For 1 Litre Base

5026

Lock Plate (2 Req'd)

5027

Lock Spring (2 Req'd)

5028

Lock Screw (2 Req'd)

5038

Gasket

5039

Gasket Adapter

5040

Gauge Gasket

5043

Packing Nut

5044

Nut Gasket

5053

Can Stop (2 Req'd)

5055

Whitey Valve

5056

Whitey Valve Complete with #5057 and #5058

5057

Hose Nipple

5058

Nipple Nut

1030

Pressure gauge, 2" dia. (Dual scale 0-60psi & 0-4.2kg/cm2) 1/8 NPT lower male connection.

 

 

Model 6001:  COtester complete with dial thermometer and pressure gauge.  The unit accomodates cans or bottles up to one liter size.

Model 6002:  COtester complete with dial thermometer and pressure gauge.  The unit accomodates cans or bottles up to three liter size. 

 Series #7000:  Zahm New Style Air Tester with Dial Thermometer

The air tester measures C02 gas and air content in bottles and cans.  It adjusts automatically to different size bottles and cans.  The tester is available in one or three liter size.  It comes with two pressure/temperature relationship charts to determine C02 gas volume in either alcoholic or non-alcoholic beverages.  The tester is equipped with a dual-scale pressure gauge and an adjustable dual-scale dial thermometer.

 

7001

Zahm New Style Air Tester W/Dial Thermometer Complete Instrument - 1 Litre Capacity

7002

Zahm New Style Air Tester W/Dial Thermometer Complete Instrument - 2 Litre Capacity

6003

Dial Thermometer 2" Dual Scale (25/125 F. & -5/55 C.) 8" Long Stem-Adjustable

6007

Dial Thermometer Adapter

6008

Adapter "O" Ring

6009

Adapter Nut

6011

Piercing Neddle .703 OAL of Piercing Point

6013

Rubber Seal

6014

Stop Pin Collar W/Pin

6018

Cross Bar - 1 Litre Size

5003-25

Burette W/Teflon Stopcock (0-25ml) O-100ml Capacity

5005

Replacment Stopcock for Burette

5006

Burette Clamp Complete

5017

Guide Rod (2 Req'd)

5017

Guide Rod / Support Rod for Burette(1 Req'd)

5020

Base 1 - Litre Size

5022

Base Pad (Top) 1 Litre Size

5022-A

Base Pad (Bottom) 1 Litre Size

5026

Lock Plate (2 Req'd)

5027

Lock Spring (2 Req'd)

5028

Lock Screw (2 Req'd)

5038

Gauge Gasket

5039

Gauge Adapter

5040

Adapter Gasket

5043

Packing Nut

5044

Nut Gasket

5046

Rubber Coupling

5047

Level Bottle

5050

Level Bottle Stand

5052

Connection Tubing

5053

Can Stop (2 Req'd)

5054

Can Stop Screw (2 Req'd)

5055

Whitey Valve

5057

Hose Nipple

5058

Nipple Nut

5079

Caustic Trap

5080

Plastic Coupling

1030

Pressure Gauge (0-60psi & 0-4.2kg/cm2) 1/8 Npt Lower Male Connection

 

 

Model 7001:  Piercing device for measuring C0and air content in bottles or cans up to one liter size.  Unit is equipped with a pressure gauge, burette and dial thermometer.

Model 7002:  Piercing device for measuring C0and air content in bottles or cans up to three liter size.  Unit is equipped with a pressure gauge, burette and dial thermometer.

 Series #8000:  Zahm Volume Meter Gauge Tester

This tester allows the user to re-calibrate pressure gauges in the laboratory.  Unit is supplied with a 100 psi NIST certified test gauge.  Standard test gauge has been calibrated at 30, 35,40,45 and 50 psi.  Maximum test pressure is 65 psi.

 Zahm 8000P Pneumatic Gauge Tester

 Test and calibrate gauges on-site.  Gauges thread into various size adapters on the instrument.  A compatative reading is subsequently taken by increasing pressure in the unit with the hand pump to the desired reading.  The tester is simple to use and requires no messy oils or lubricants.  Cost is less than a comparable dead weight tester.

Tester comes standard with a 100 psi NIST certified test gauge.*

Standard gauge is segmented in 1/2 lb divisions.

Standard gauges have been calibrated at 5 points:  30, 35, 40, 45, and 50 psi.**

Maximum test pressure is 65 psi.

Dimension:  Length 11 in. X 11 in. Width X 13 in. Height.  Unit weighs 19 lbs.

          * Other gauge options available upon request.

        ** Other calibration points available upon request.

Different gauge options may incur an additional charge.  Please allow 4-6 weeks for delivery of non-stock items.

 

Series #9000:  Zahm Model 9000-R Pilot Plant

The Pilot Plant is used for carbonation, bottling, and batch testing of carbonated beverages.  It is made of stainless steel and suited for rugged laboratory use.  The unit consists of a filter, carbonator and filler.  All gauges are constructed of stainless steel as well and are of 1 percent high accuracy design.  The Pilot Plant comes in 5, 6 or 10 gallon size.

9010   Tank Lid
9020  Bullseye Gasket (2 Req'd)
9030  Bullseye Glass (2 Req'd)
9040  Bullseye Washer (2 Req'd)
9050  Bullseye Lock Nut (2 Req'd)
9060  Tank Lid Sealing Ring
9070  Female "T"
9080  Cross
1034  Pressure Gauge
9090  Street "T"
9100  Pressure Relief Valve
9110  Blow Off Valve
9120  Outlet Tube
9130  Dial Thermometer 20" Stem
9140  Inlet Hex Nipple
9150  Inlet Tube
9160  Swagelok Quick Connect Ass'y
9170  Swagelok Quick Connect Female
9180  Swagelok Quick Connect Male
19100  Cap Nut
5040  Gasket
19110  Washer
19150  Carbonating Stone
19130  Central Rod
19120  Stone Gasket(2 required)
19170  Special Elbow
9280  Main Filter Body
9290  Central Tube & Cover
9300  Gasket (2 Req'd/Unit)
9310  End Plug "O" Ring
9320  End Plug
9330  Handle
9340  Body Cover "O" Ring
16050  2" O.D x 10" LG. Free Flow Filter Stone (Re-Useable)
9360-1  1 Micron Disposable Filter Cartridge
9360-3  3 Micron Disposable Filter Cartridge
9360-5  5 Micron Disposable Filter Cartridge
9360-10  10 Micron Disposable Filter Cartridge
9370  Stainless Steel Nupro Valve (Teflon Coated Plug)
9530  Male Quick Connect (optional)
9380  Optional Female Quick Connect
9390  Optional Female/Male Nupro Valve
9400  Delrin Handle
9410  Body
9420  Bleeder Valve
9430  Filter Tube (Can Be Cut To Custom Lengths)
9440  Neoprene Bottle Seal
9370  Stainless Steel Nupro Valve (2 Req'd/Unit)
5055  Metering Valve
9460  Hex Nipple 1/8 NPT (2 Req'd)
9470  Filter
9495  Flow Meter (Assembled)
9500  Adapter 1/8 NPT to ¼ " Hose (2 Req'd)
9510  ¼ " Hose Nut
9520  ¼ " Hose Nipple
9540  ½ " O.D x ¼ " I.D x 48" LG. Tygon Plastic Tubing
9550  Stainless Steel Hose Clamps for ½ " O.D Tubing
9580  Hose Nut Gaske

Model 9000-R-5:  5 gallon size pilot plant

Model 9000-R-6:  6 gallon size pilot plant

Model 9000-R-10:  10 gallon size pilot plant    

 

 

Series #10000:  Zahm COGas Purity Tester

This device measures the purity of the C02 gas.  It makes gas testing simple, fool-proof, clean and highly accurate.  The instrument is supplied with a caustic resevoir (10100.)  The user needs to determine which absorption burette is needed.  Absorption burettes available are:

                                     Part number               Graduation                Scale

                                     10101                        0.10%                      99% to 100%

                                     10102                        0.01%                      99% to 100%

                                     10103                        1.00%                      70% to 99%

                                                                      0.20%                      99% to 100%

                                     10104                        1.00%                      50% to 100%

                                     10105                        0.10%                      95% to 100%

Several tester models are available.  See below:

Model 10001:  Tester with stand, bands, burette and reservoir.  Calibration 99% to 100% in 0.1%.

10001    Standard Tester W/Stand, Bands, Reservoir & Burette (99 to 100% In 0.1% increments)
10101    Calibrated Absorption Burette (99 to 100%In 0.1%)
10100    Caustic Reservoir
5005      Teflon Stopcock
10107    Rubber Covered Band W/Nut (Fits #10101 Burette)
10109    Rubber Covered Band W/Nut (Fits #10100 Reservoir)
10110    Frame - 2Pc W/Center Block
10113A  Protective Case
10114    Plastic Connector

Model 10002:  Tester as above and with protective metal case.

Model 10003:  Tester with stand, bands, burette and reservoir.  Calibration 99% to 100% in 0.01%.

10003       Tester W/Stand, Bands, Reservoir & Burette (99 to 100% In 0.01%)
10102       Calibrated Absorption Burette (99 to 100%In 0.01%)
10100       Caustic Reservoir
5005         Teflon Stopcock
10108       Rubber Covered Band W/Nut (Fits #10102 Burette)
10109       Rubber Covered Band W/Nut (Fits #10100 Reservoir)
10111       Frame - 2Pc W/Center Block and support block
10113A     Protective  Case
10114       Plastic Connector

Model 10004:  Tester as above and with protective metal case.

Model 10005:  Tester with stand, bands, burette and reservoir.  Calibration 70% to 99% in 1.0%, 99% to 100% in 0.2%.

Model 10006:  Tester as above and with protective metal case.

Model 10007:  Tester with stand, bands, burette and reservoir.  Calibration 50% to 100% in 1.0%.

Model 10008:  Tester as above and with protective metal case.  

Model 10009:  Tester with stand, bands, burette and reservoir.  Calibration 95% to 100% in 0.1%.

Model 10010:  Tester as above and with protective metal case.

 

Series #11000:  Modified Piercing Device

The Series 11000 Piercing Device is a modified Zahm New Style Air tester (Series 5000) with the burette, burette clamp, support rod, level bottle, stand, and connection tubing omitted.  This instrument is used where a separately mounted burette is preferred for air testing or where a fast, simple closure piercing unit is required to measure pressure.  Where samples are tested at room or known temperature, gas pressure can be quickly obtained to determine CO2 gas volumes.

 

11001   Zahm Modified Pierceing Device - 1 Litre Size
1030     Pressure Gauge
5017     Guide Rod (2 Req'd)
5020     Base - 1 Litre
5022     Base Pad (Top) - 1 Litre
5022A   Base Pad (Bottom) 1 -Litre
5024     Cross Bar 1 - Litre
5026     Lock Plate (2 Req'd)
5027     Lock Spring (2 Req'd)
5028     Lock Screw (2 Req'd)
5038     Gauge Gasket
5039     Gauge Adapter
5040     Adapter Gasket
5042A   Piercing Needle (.703 OAL Piercing Point-STD.)
5043     Packing Nut
5044     Nut Gasket
5045     Rubber Seal
5053     Can Stop (2 Req'd)
5054     Can Stop Screw (2 Req'd)
5055     Whitey Valve
5056     Whitey Valve W/5057 Nipple & 5058 Nut
5057     Hose Nipple
5058     Nipple Nut
5059     Replacement Parts for Whitey Valve
5059-1 Handle
5059-2 Stem
5059-3 Packing Nut
5059-4 Panel Nut
5059-5 Teflon Washer
5059-6 Top Gland
5059-7 Bottom Gland
5059-8 Body

 

Model 11001:  Tester complete with pressure gauge.  Unit accommodates bottles or cans up to one liter size.

Model  11002:  Tester complete with pressure gauge.  Unit accommodates bottles or cans up to three liter size. 

 

Series #11000-GC:  Modified Piercing Device

This piercing device was especially developed for purge and trap (PAT) analysis of gases, liquids or solids.  It is ideal for all gas chromatographic sampling.  The 11000-GC offers these benefits:

PAT samplings of cans, mason jars, beer bottles, vials from 1-250 ml and various other bottles without additional adaptors.

Complete control of the sampler from the PAT unit.

Quick disconnect of the PAT unit for carbonyl analysis.                            

 

Series #14000:  Zahm Computerized Piercing Device

 

This piercing device is a micro-processor based instrument used for testing C02 gas volume.  The use of gas conversion charts is not needed.  Reliable results are achieved even by novice users.  Temperature and pressure are displayed on the LCD display and recalibration can be done by the user.  The device comes in one or two liter sizes.  Computer and thermometer can be ordered separately to attach onto existing Zahm piercing devices.

6006

Thermometer Stop

14004

Temperature sensor

5018

Guide Rod 19" Long (2 req'd) for 2 liter size tester

5057

Hose nipple (Teflon)

14003

Computer

5058

Nipple nut

6019

Cross bar for 2 liter size Tester

5077

Snift Valve

5027

Lock Springs (2 req'd)

6007

Thermometer Adapter

5026

Lock Plates (2 req'd)

5044

Nut Gasket

5028

Lock Screws (2 req'd)

5043

Packing nut

5023

Base Pad for 5021 Base (2 req'd)

6013

Rubber seal

5021

Base (2 liter size)

6011

Piercing Needle 0.703 OAL of Piercing Point

6008

Adapter "O" Ringer

5017

Guide Rod 15" long (2 req'd) for 1 liter size tester

6009

Adapter Nut

6018

Cross bar for 1 liter size tester

5038

Gauge gasket (nylon)

5022

Base Pad (top) for #5020 Base

5039

Gauge Adapter

5020

Base (1 liter size)

5040

Adapter Gasket (nylon)

5022A

Base Pad (bottom) for #5020 Base

 

Model 14001:  Computerized piercing device which accomodates cans or bottles up to one liter size.

Model 14002:  Computerized piercing device which accomodates cans or bottles up to three liter size. 

 

Zahm Carbonating Stones

Since dissolved air is an unwanted byproduct, it is desirable to remove it during the beer-making process.  Zahm Unit Tank Carbonation removes the excess amount of dissolved air.  The result is a better tasting beer.

Zahm stainless steel stones (Series 19,000) are designed for use in tanks up to about thirty barrels. For larger tanks and where a finer bubble is desired, Zahm ceramic stones (Series 16,000) are available.  Multiple stones may be installed in large tanks to achieve the desired carbonation.

 

 

 

 

Series 1000 CO2 Volume Meter

The Zahm SS-60 Volume Meter was developed to determine average CO2 levels of gas in tank stored beverages. 

 

 

Series 6000 D.T. Piercing Device

The Zahm Model D.T. Piercing Device is used to test carbonated beverages for volumes of CO2 gas in glass/PET bottles and cans. 

 

 

 

Series 10,000 Gas Purity Tester

The Zahm CO2 Gas Purity Tester is an improved absorption bottle designed to eliminate confusing cocks, hose connections, awkward manipulation and the usual caustic spillage. 

 

 

 

 

Series 14,000 Computerized Piercing Device

The Zahm Computerized Piercing Device is a newly developed instrument for testing volumes of C02 gas in bottles and cans.

 

 

 

Headspace Air Testing Equipment

Description: Minimize

 

 Series 5000 New Style Air Tester

This instrument is recommended for testing air content where greater speed and accuracy is required.

Laboratory Support Equipment

Description: Minimize

 

 

 

Series 2037, 3000 and 4000 Zahm Clamping Device, Zahm Sample bottle, Zahm COGas Header

The Sample Bottle was designed to make possible the taking of a sample of carbonated beverage from a tank without the introduction of extraneous air or loss of gas.

 

  Series 7000 Zahm New Style Air Tester w/Dial Thermometer

This instrument if used to test beverage or product for CO2 gas and air content in either glass of PET containers and cans. 

 

 Series 8000 Zahm Gauge Tester

Extremly accurate instrument used to test and calibrate gauges on site. 

 

 Series 9000 Zahm Pilot Plant  

 

 Series 11,000 Zahm Modified Piercing Device

This instrument is used where a separately mounted burette is preferred for air testing or where a fast, simple closure piercing unit is required to measure pressure. 


 

Carbonation Equipment

Description: Minimize

 

Series 16,000 Ceramic Carbonating Stone 

 

Series 19,000 Stainless Steel Carbonating Stone

 

 CARBONATION CURRENTLY UNDER CONSTRUCTION